Folding Saw Gyokucho

June 13, 2019 Off By nvq

RARORSAW FOLDING SAW LINEUP

RAZORSAW ORIKOMI 200 All Purpose

Can be used to cut different materials.

There are two steps adjustment of opening angles. If you are looking for a general hand saw for cutting all sorts of materials, such as general timber, green wood, and plastic, this is the one to choose. When it's folded, you can safely store it in your tool box without damaging the blade.

Use

For timberman's, landscaping, wood working, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ORIKOMI 250 All Purpose

If you are not sure which saw to choose, choose all purpose folding saw!

The handle can be adjusted to two different angles. This is the saw for people who want to cut different kinds of materials such as general timber, green wood, and plastic. When it's folded, you can safely store it in your tool box.

Use

For timberman's, landscaping, wood working, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ORIKOMI 200 Extra-Fine Teeth

Best cutting quality and clean cutting surface!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, wood working, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.

Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ORIKOMI 250 Extra-Fine Teeth

Good for wood crafts too!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, wood working, wood crafts, and bamboo crafts

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.

Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ORIKOMI 200 Large Teeth

Smooth and easy cut to start, and powerful cut as you start cutting with full strokes.

The handle can be adjusted to two different angles. Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes. If you would like to keep the saw in your tool box, we recommend a folding saw.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ORIKOMI 250 Large Teeth

For landscaping and frame working!

The handle can be adjusted to two different angles. The size of the tooth is biggest on the tip of the blade, and it gradually becomes smaller towards the handle. Such structure gives you a powerful cut.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

FD series Lineup

RAZORSAW FD-20A All Purpose

Can be used for different purposes!

By putting some rip cut teeth in between cross cut teeth, you can make clean cuts across the grain, parallel to the grain, and diagonally to the grain. It gives you smooth cut with clean cutting surface.

Use

For timberman's, landscaping, wood working, green wood and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW FD-20B Bamboo

For smooth cuts and clean cutting surface!

They have special teeth for cutting bamboos. You can make clean cuts.

Use

For bamboo felling, wood working, wood crafts, and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.

Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW FD-20T Timberman's

Tapered blade with some rip cut teeth.

You can cut along, across, and diagonally to the grain, so it's suited for cutting materials with complicated fiber pattern.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

Our Timberman's saws have teeth specialized in cutting composite wood fast.
You can cut materials fast with it.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

RAZORSAW FD-20J Plastic

Special teeth for cutting plastic!

Tough teeth cut PVC pipes and hard materials smooth and clean.

Use

For PVC piping work, and cutting plastic.

Materials

PVC pipe, Acrylic resin, and Formica laminate

Characteristics of the main body

Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Our plastic saws have rip cut teeth with some characteristics of cross cut teeth for cutting plastic that have no fiber.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

RAZORSAW FD-20G Green Wood

The opening angle of the saw can be adjusted by two types.

Smooth cutting to start with, and powerful cut as you start cutting with full strokes.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

RAZORSAW FD-20F Fruit Tree

The opening angle of the saw can be adjusted by two types.

Medium size teeth do not shake the branches as much as large teeth. This makes clean cuts and prevent damaging the trees.

Use

For pruning fruit trees and general green wood.

Materials

Green wood

Characteristics of the main body

Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

Blade can be folded into the handle. You can put them in your tool box.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

List of F series specifications

Classification Art. No. Product Name Blade Length Blade Thickness Cutting Width Teeth Pitch JAN Code Price
Main body 810 RAZORSAW ORIKOMI 200 All Purpose 200mm 0.7mm 1.05mm 2.2mm 4903524081011 3,180yen
Spare blade S-810 Spare blade for
RAZORSAW ORIKOMI 200 All Purpose
4903524281015 1,800yen
Main body 812 RAZORSAW ORIKOMI 250 All Purpose 250mm 0.8mm 1.13mm 2.5mm 4903524081219 3,750yen
Spare blade S-812 Spare blade for
RAZORSAW ORIKOMI 250 All Purpose
4903524281213 2,000yen
Main body 814 RAZORSAW ORIKOMI 200 Extra-Fine Teeth 200mm 0.7mm 1.00mm 1.5mm 4903524081417 3,180yen
Spare blade S-814 Spare blade for
RAZORSAW ORIKOMI 200 Extra-Fine Teeth
4903524281411 1,800yen
Main body 815 RAZORSAW ORIKOMI 250 Extra-Fine Teeth 250mm 0.8mm 1.10mm 1.7mm 4903524081516 3,750yen
Spare blade S-815 Spare blade for
RAZORSAW ORIKOMI 250 Extra-Fine Teeth
4903524281510 2,000yen
Main body 811 RAZORSAW ORIKOMI 200 Large Teeth 200mm 0.8mm 1.12mm 3.5-2.6mm 4903524081110 3,180yen
Spare blade S-811 Spare blade for
RAZORSAW ORIKOMI 200 Large Teeth
4903524281114 1,800yen
Main body 813 RAZORSAW ORIKOMI 250 Large Teeth 250mm 0.85mm 1.18mm 3.6-2.7mm 4903524081318 3,750yen
Spare blade S-813 Spare blade for
RAZORSAW ORIKOMI 250 Large Teeth
4903524281312 2,000yen
Main body 840 RAZORSAW FD-20A All Purpose 200mm 0.7mm 1.05mm 2.2mm 4903524084012 3,830yen
Spare blade S-840 Spare blade for
RAZORSAW FD-20A All Purpose
4903524284016 1,800yen
Main body 842 RAZORSAW FD-20B Bamboo 200mm 0.7mm 1.00mm 1.5mm 4903524084210 3,830yen
Spare blade S-842 Spare blade for
RAZORSAW FD-20B Bamboo
4903524284214 1,800yen
Main body 845 RAZORSAW FD-20T Timberman's 200mm 1.1mm 1.15mm 3.0mm 4903524084517 4,080yen
Spare blade S-845 Spare blade for
RAZORSAW FD-20T Timberman's
4903524284511 2,050yen
Main body 843 RAZORSAW FD-20J Plastic 200mm 0.6mm 0.90mm 1.5mm 4903524084319 3,830yen
Spare blade S-843 Spare blade for
RAZORSAW FD-20J Plastic
4903524284313 1,800yen
Main body 841 RAZORSAW FD-20G Green Wood 200mm 0.8mm 1.12mm 3.5-2.6mm 4903524084111 3,830yen
Spare blade S-841 Spare blade for
RAZORSAW FD-20G Green Wood
4903524284115 1,800yen
Main body 844 RAZORSAW FD-20F Fruit Tree 200mm 0.7mm 1.00mm 2.2mm 4903524084418 3,830yen
Spare blade S-844 Spare blade for
RAZORSAW FD-20F Fruit Tree
4903524284412 1,800yen
*Although spare blades listed above are compatible, longer teeth might not exactly fit in the handle when it's folded.
 
Facebook Comments