Japanese handsaw GYOKUCHO 180mm – Razor Saw C, D, E, J Series

March 26, 2020 Off By nvq

RAZORSAW 180 

180mm series are small, so you can put them in your tool box. There are 12 types of blades for cutting different materials.
 
Small Dozuki Series (C, D): Dozuki Extra Fine — Razorsaw 180 DOZUKI, Razorsaw 180 DOZUKI Rattan Handle
Dozuki Fine — Razorsaw 180 KOMAME, Razorsaw 180 KOMAME Rattan Handle Dozuki, Razorsaw 180 Usuba, Razorsaw 180 JUCHI.
 
Small USUBA Series  (E) : Razorsaw 180 USUBA, Razorsaw 180 USUBA Rattan Handle
Wood Working — Razorsaw 180 USUBA, Razorsaw 180 USUBA Rattan Handle
Double edge — 
Small RYOBA Series (J): Razorsaw 180 RYOBA, Razorsaw 180 RYOBA Rattan Handle
Plastic — Razorsaw 180 JYUSI, Razorsaw 180 JYUSI Handle
 

MÔ TẢ CÁC DÒNG CƯA RYOBA

Dozuki Extra Fine ( C series )

Small handy saw for professionals!

They come with a handle made out of elastomer resin. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

Classification Art. No. Name Blade Length Blade Thickness Cutting Width Teeth Pitch JAN Code Price
Main body 297 RAZORSAW 180 DOZUKI 180mm 0.3mm 0.46mm 1.0mm 4903524029716 2,960yen
Spare blade S-297 Spare blade for
RAZORSAW 180 DOZUKI
4903524229710 1,700yen

Dozuki KOMAME Razor Saw 180mm ( D series )

RAZORSAW 180 DOZUKI KOMAME

Small handy saw for professionals!

They come with a handle made out of elastomer resin. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Dozuki USUBA Razor Saw 180mm ( D series )

RAZORSAW 180 DOZUKI USUBA ( D series)

It's small, but very handy!

The blade is 0.3mm thick with EVA grip. The tip of the blade is curved, so you can cut a hole on a flat surface.

Use

For wood crafts, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Characteristics of teeth

The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

JUSHI Razor Saw 180mm ( D series )- for PLASTIC

RAZORSAW 180 JUSHI ( D series)

No problem cutting hard wood!

0.3mm thick rip cut saw with EVA grip. Rip cut saws can be used to make cross cuts too. The teeth are for tough work, so you can cut hard materials such as decking material and plastic. They have long metal spline that firmly attaches a blade onto the handle.

Use

For cutting plastic, wood crafts, carpentry work, DIY, making furnitures, sculpturing and musical instruments.

Materials

Acrylic resin, Formica laminate, Ebony, Rose wood, Deking material, PVC, General timber, Laminated wood, and Ply wood

Characteristics of the main body

Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Wood Working ( E series )

RAZORSAW 180 ATSUBA (E series)

RAZORSAW 180 ATSUBA

You can cut along, across, and diagonally to the grain.

EVA grip is made out of elastomer resin. It's a 0.5mm thick wood working saw. The blade is thick and tough and easy to use.

Use

For DIY, wood crafts, carpentry work, making furnitures, musical instruments, and bamboo crafts.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), Ply wood, and Bamboo material

Characteristics of the main body

Ideal for carpentry work and DIY. Wood working saws are grouped into either single edge saws or double edge saws.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.

They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

RAZORSAW 180 RYOBA J SERIES

RAZORSAW 180 RYOBA J SERIES

Small, but very handy!

You can make both cross cuts and rip cuts with a double edge saw. They are great for craft work and wood work.

Use

For DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo materialFor DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo material

Characteristics of the main body

You can make both rip cuts and cross cuts with a double edge wood working saw. The teeth pitch is smaller for making extra clean cuts.

Bạn sẽ có một lưỡi cắt hoàn toàn mới bằng cách thay thế cho một lưỡi dao mới. Chúng tôi đánh dấu số mục trên lưỡi dự phòng. Vui lòng kiểm tra số trên cưa của bạn khi mua một lưỡi dao.

EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.

Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

Edges on rip cut saws are flat. It cuts the material like a chisel.

Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Facebook Comments