Home » Blog » EN-Gyokucho » Product infomation A series Lineup

Product infomation A series Lineup

March 26, 2020 Off By nvq

Lineup

Razorsaw A with rattan handle, Razorsaw A with EVA GRIP, Razorsaw ZA with rattan handle, and Razorsaw ZA with EVA GRIP

You can make fine cuts, and they are ideal for craft work. The blade is only 0.3mm thick. They come in two different styles, A and ZA. Razorsaw A is our regular craft saw, and Razorsaw ZA has a curved tip which you can use to make holes on a flat surface. Available with a traditional rattan handle or EVA grip.

 
 

MÔ TẢ CÁC DÒNG CƯA RYOBA

RAZORSAW A

RAZORSAW A

Great for craft work for making fine cuts!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

 

For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand..

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

    Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW A TPE

Fine cut saw with the best cutting quality!

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. The blade is just 0.3mm thick. They are ideal for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica Laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side

The entire handle is coated with elastomer resin, and it gives you good grip

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

    Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ZA

Curved tip for craft work!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand..

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of the teeth

The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.

    Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

RAZORSAW ZA TPE

Saiku fine cut saw that can cut holes.

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. The blade is just 0.3mm thick. You can make holes on a flat surface using the curved tip. Long back metal holds the blade firmly.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand..

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Surface of the blade is coated with nickel, and it prevents rusting.

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.

    Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

By putting sets on the teeth, it prevents the blade from being stuck in between the material

List of A series specifications

Classification Art. No. Product Name Blade Length Blade Thickness Cutting Width Teeth Pitch JAN Code Price
Main body 300 RAZORSAW A 240mm 0.3mm 0.51mm 1.5mm 4903524030002 3,950yen
Main body 301 RAZORSAW A TPE 4903524030118 3,950yen
Spare blade S-300 Spare blade for
RAZORSAW A		 4903524230006 1,780yen
Main body 306 RAZORSAW ZA 240mm 0.3mm 0.51mm 1.5mm 4903524030026 4,380yen
Main body 307 RAZORSAW ZA TPE 4903524030712 4,380yen
Spare blade S-306 Spare blade for
RAZORSAW ZA		 4903524230020 2,030yen
Main body 303 TATEBIKI NOKO -Trade only products- 240mm 0.3mm 0.52mm 1.5mm 4903524030316 Open price
Main body 304 TATEBIKI NOKO TPE -Trade only products- 4903524400683 Open price
Spare blade S-303 Spare blade for
TATEBIKI NOKO -Trade only products-		 4903524230310 Open price
Main body 311 SUN CHILD -Trade only products- 240mm 0.3mm 0.5１mm 1.3mm 4903524031115 Open price
Spare blade S-311 Spare blade for
SUN CHILD -Trade only products-		 4903524231119 Open price
*The blades listed above are compatible. They fit on both rattan handle and EVA GRIP.
Facebook Comments
CategoryEN-Gyokucho