Cưa cầm tay Dozuki Series B

Tháng Tám 28, 2018 Off By nvq
Cưa cầm tay Dozuki Series B

Dozuki Extra Fine Promotion Video

Lineup

Razorsaw Dozuki, Dozuki Wide Type, and Tatebiki Dozuki Style

Dozuki saws are great for finishing work for wood crafts and bamboo crafts. The very basic traditional Dozuki saw. The Wide Type can cut materials up to 6cm thick. Tatebiki Dozuki Style can make both rip cuts and cross cuts.

B series

New Accordion Tab

RAZORSAW Flush Cutting Saw

For those of you who are looking for a hand saw for intricate work!

0.3mm thin blade with a traditional rattan handle. They have teeth pitch 1.0mm, and it's ideal for intricate work. The blade is firmly attached to the handle with a full back metal.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

New Accordion Tab

DOZUKI ahead of the ideal!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses SEIGAIHAMON and never gets tired. 0.3mm thin blade with a traditional rattan handle. They have teeth pitch 1.0mm, and it's ideal for intricate work. The blade is firmly attached to the handle with a full back metal.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Long metal spine on Dozuki saws comes in the way when you try to cut material thicker than the blade width. Can cut up to 6cm thick.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

New Accordion Tab

You can cut materials up to 6cm thick!

Our Dozuki Wide Type has a blade that's 10mm wider than our regular Dozuki. You can cut materials up to 6cm thick. The blade is 0.3mm thick, and it comes with a traditional rattan wrapped handle. They have teeth pitch as small as 1.0mm. Ideal for intricate work.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Long metal spine on Dozuki saws comes in the way when you try to cut material thicker than the blade width. Can cut up to 6cm thick.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

New Accordion Tab

The width increases the width of woodworking!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses SEIGAIHAMON and never gets tired. Our Dozuki Wide Type has a blade that's 10mm wider than our regular Dozuki. You can cut materials up to 6cm thick. The blade is 0.3mm thick, and it comes with a traditional rattan wrapped handle. They have teeth pitch as small as 1.0mm. Ideal for intricate work.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.

Long metal spine on Dozuki saws comes in the way when you try to cut material thicker than the blade width. Can cut up to 6cm thick.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

New Accordion Tab

For making tenons and for cutting hard wood!

Rip cut teeth are good for both rip cutting and cross cutting, and for making tenons. Rip cut teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

The blade width is narrower than Saiku fine teeth. We offer standard Dozuki, Dozuki Wide Type, and Dozuki Noko Tatebiki Style.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

New Accordion Tab

Ripcut Crosscut hard wood resin, this one!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses SEIGAIHAMON and never gets tired. Rip cut teeth are good for both rip cutting and cross cutting, and for making tenons. Rip cut teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

The blade width is narrower than Saiku fine teeth. We offer standard Dozuki, Dozuki Wide Type, and Dozuki Noko Tatebiki Style.

By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.

Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.

Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.

Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws

The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Surface of the blade is coated with nickel, and it prevents rusting.

Characteristics of teeth

By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.

Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Tapered blade works just like sets. Our pruning saws with tapered back has no sets.

List of B series specifications

Classification Art. No. Product Name Blade Length Blade Thickness Cutting Width Teeth Pitch JAN Code Price
Main body 370 RAZORSAW DOZUKI 240mm 0.3mm 0.46mm 1.0mm 4903524037001 5,100yen
Main body 373 RAZORSAW DOZUKI TPE 4903524310319 5,100yen
Spare blade S-370 Spare blade for
RAZORSAW DOZUKI
4903524237005 2,830yen
Main body 371 RAZORSAW DOZUKI WIDE TYPE 240mm 0.3mm 0.46mm 1.0mm 4903524037100 5,230yen
Main body 374 RAZORSAW DOZUKI WIDE TYPE TPE 4903524310326 5,230yen
Spare blade S-371 Spare blade for
RAZORSAW DOZUKI WIDE TYPE
4903524237104 2,950yen
Main body 372 RAZORSAW TATEBIKI DOZUKI STYLE 240mm 0.3mm 0.51mm 1.3mm 4903524400096 5,100yen
Main body 375 RAZORSAW TATEBIKI DOZUKI STYLE TPE 4903524310333 5,100yen
Spare blade S-372 Spare blade for
RAZORSAW TATEBIKI DOZUKI STYLE
4903524400102 2,830yen
*Replacement blades listed above are compatible.

Facebook Comments